WP100 Oxime Silicone Sealant

Description

Name: WP100 Oxime Silicone Sealant

A premium, single component, moisture curing, neutral cure silicone sealant.

Features: Permanently elastic. – Contains additional PVCu adhesion promoters. – Rapid curing. – UV stable colours. – Suitable for alkaline and metal surfaces. – Contains fungicide – mould resistant. – External use. – UKCA Approved. – Conforms to EN15651‐1,2,3 F EXT‐INT, G, XS1.

Application: Suitable for use as a perimeter sealant for external door and window frames made from wood, aluminium and uPVC . Also for weather sealing and flexible jointing of infill panels. Can be used for building and construction joints and joints between different materials with high movement. Compatible on concrete, plaster and mortar.

Instructions: Preparation: Ensure all surfaces are clean, dry and free from grease or any contaminants that may hinder adhesion. For best results on movement joints, Bond It Expanding Foam or Backer Rods are recommended as a backing material.</p><p>Cleaning: Tools can be cleaned in Bond It White Spirit or Multi-Wipes prior to curing taking place.

Limitations: Porous surfaces should be primed first. Do not use on surfaces where water can penetrate through porous materials to the bond interface without first carrying out remedial work.

Not suitable for use with aquaria. Not suitable for use on bitumen or asphalt. Over-painting is not recommended. Risk of yellowing in low UV light situations. (e.g. if used indoors) whilst curing. Sealant may crack if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.