Roof Seal Reinforcing Mat

Name: Roof Seal Reinforcing Mat

Heavy duty spunbond polyester mat for use with Seal It Roof Seal liquid roofing membrane.

Features: Tear and puncture resistant. – Improves strength. – Rapid repair for blisters, splits and tears in existing substrates prior to coating.

Application: Use of the seal it Reinforcing Mat with Seal it Roof Seal liquid membrane provides more than 50% strength improvement when product has cured. It can also be used to make good tears, rips and damage to substrates as a repair patch, prior to using Seal It Roof Seal membrane. Follow surface preparation instructions for Seal It Roof Seal membrane. Seal It Reinforcing Mat can be applied straight off the roll or cut to size prior to use.

Instructions: Preparation: Follow surface preparation instructions for Seal It Roof Seal membrane. Seal It Reinforcing Mat can be applied straight off the roll or cut to size prior to use.
Application: Apply a 1mm coat of Seal Ir Roof Seal Membrane . and press the reinforcement mat into it with light pressure whilst the coating is still wet (refer to separate instructions for use of Seal It Roof Seal membrane). A minimum overlap of 5cm is recommended between adjoining strips of reinforcing material. Use a small amount of Seal It Membrane to adhere the overlapping region. When the first coat has dried sufficiently to walk on (approximately 8 hours depending on conditions) apply a second layer of Seal It Roof Seal to fully cover the mat and bring total thickness to at least 2mm. When using as a patch repair over blisters, splits, etc. then the mat and coating must extend at least 5cm beyond the affected area.

Limitations: