Stabilising Solution

Name: Stabilising Solution

A white, ready-to-use, water-based treatment for bonding and priming surfaces prior to painting and decorating.

Features: Solvent-free. – Quick drying. – Stabilizes poor surfaces. – Seals and binds chalky or weathered areas. – Can be applied to damp surfaces. – Provides a sound base for decorating. – For interior and exterior use.

Application: For use as a pre-treatment for surfaces which are old, weathered, chalky or porous. Suitable for use on most substrates including concrete, cement, plaster, plasterboard, renders, pebble dash and MDF, etc.

Instructions: Preparation: Ensure all surfaces are clean and free from any contaminants including loose and flaking material. Remove any mould or algae with Mould Stop or Patio Blaster prior to application.
Application: Do not dilute. Stir well and apply by brush, roller or airless spray. A second coat may be required on porous or powdery surfaces but allow 12 hours drying time between application of coats.
Cleaning: Rinse equipment after use with plenty of clean water.

Limitations: Do not apply when the temperature is below +5oC or when rain or frost is imminent. However, this product can be applied to damp substrates.