Aerosol Spray Adhesive

Name: Aerosol Spray Adhesive

A non-chlorinated, exceptionally powerful, long lasting, multi-purpose adhesive in a can.

Features: Non-chlorinated. – Excellent bonding properties. – Long lasting performance. – Fitted with variable discharge nozzle. – Gives exceptionally strong adhesion for a wide range of demanding uses. – DCM Free.

Application: Use on wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper and cork. Ideal for perimeter bonding of carpet tiles and minor flooring installations, and for use in the furniture, and automotive industries, especially for bonding foam to a variety of surfaces. Also suitable for use in repair and non-structural applications where a high strength bond is required.

Instructions: Preparation: SHAKE WELL BEFORE USE. ONLY USE IN WELL VENTILATED AREAS. Ensure surfaces are clean, dry and free from any contaminants that may hinder adhesion. For best results; use in temperatures between +15 and +25oC.
Application: Apply to the surface holding the can approx. 25cm away. For a strong bond apply to both surfaces, for a lighter bond apply to only one. Leave the solvent content of the adhesive to evaporate for 3-5 minutes before bringing the surfaces and applying pressure, working outwards from the centre. The can is fitted with a variable discharge nozzle that controls the width of the spray fan; the more pressure applied to the nozzle the wider the fan.
Cleaning: Excess adhesive is easily removed by using solvent / lighter fluid, etc. When finished; invert the can and spray for a few seconds in order the clear the valve ready for the next use.

Limitations: Not recommended for use on polystyrene or plasticised PVC. Note: This product should not be used for construction purposes such as unsupported head linings in vehicles and boats. It is NOT suitable for use with non rigid / plasticised PVC and should not be used on surfaces where temperatures may exceed +50oC.