Expanding Foam Gun Cleaner

Name: Expanding Foam Gun Cleaner

A dual purpose, solvent-based solution for effective cleaning of expanding foam applicator guns and removal of wet/uncured foam. Regular cleaning is essential in order to prolong the service life of the applicator and optimise foam delivery. Attaches to standard foam applicator guns.

Features:

Application: Removes and dissolves fresh, uncured PU-foam from expanding foam gun applicators. The can is fitted with an adapter ring which screws on to the gun. For use without the gun, the can is fitted with a spray head. This dual function meets the requirements of the professional user.

Instructions: Preparation: A suitable waste container and a cloth should be at hand for disposal of waste fluids and wiping away cleaner fluid and dissolved PU foam residues.
Using: Remove the PU foam can from the gun. Use the spray head on the GUN FOAM CLEANER can to clean the adapter part and the outer body of the gun. Remove the red spray head from the GUN FOAM CLEANER can and carefully screw the can on to the gun. For safety reasons, the gun trigger should be pulled whilst screwing on the cleaner can. This will depressurise the gun. Pull the trigger to purge the gun. As soon as cleaning fluid appears at the tip of the gun, release the trigger and allow the cleaner to work inside the gun for approximately two minutes, then flush out the gun into a waste container. Repeat this procedure until only clear cleaner fluid comes from the gun. Once the cleaning procedure is completed, unscrew the GUN FOAM CLEANER can from the gun.
Important: Only fresh foam can be removed with GUN FOAM CLEANER. Cured foam can only be removed mechanically. Note: Sharp instruments must never be used on PU foam applicator guns as this may damage the protective coating of the gun. As from 24 August 2023 adequate training is required before industrial or professional use.

Limitations: Because GUN FOAM CLEANER for applicator guns contains acetone, it may dissolve or discolour surfaces such as plastics, lacquers, coatings, paints, textiles etc. Use with extreme care and
test suitability before use.