Alkyd Floor Paint

Name: Alkyd Floor Paint

A high solids, low viscosity, hard wearing, heavy duty alkyd formulation floor paint for use internally on concrete, wood, brick and stone.

Features: Oil and acid resistant. – Dries to a satin finish. – Hard wearing alkyd formulation. – Ideal for old or new concrete. – Easy application for large areas. – Durable protection. – For interior use.

Application: Designed to give a hard wearing, easy clean finish to concrete, stone, brick and wooden floors subject to light to medium traffic including fork lift trucks and scissor lifts, etc. Suitable for use on garage floors, warehouses, workshops, factories, store rooms, pedestrian walkways and is designed to give enhanced durability, abrasion resistance and good resistance to dilute acids/alkalis and oils, including brake fluid, engine cleaners, screen wash, anti-freeze, power steering fluid, diesel and sump oil. Dries to a satin finish.

Instructions: Preparation: All surfaces must be clean of any contaminants such as dust, oil, etc. and dry (to the touch). Remove any loose or flaking material with a scraper and stiff brush to expose a smooth debris free surface. Remove any moss, mould or lichens with Bond It Mould Stop or Patio Blaster. Chemically or mechanically hardened floors may require abrasion prior to use. If in doubt test a small area prior to full application. This product is ready to use product and does not require diluting. Application: Priming isn’t usually required, but if necessary apply a coat of 1 part White Spirit to 4 parts paint and allow to dry before proceeding. Apply using either a brush or roller to give even coat, 2 coats are usually required. Paint should be touch dry within 2-3 hours depending on ambient temperatures, leave 16 to 24 hours
between each coat. Cleaning: Clean tools and brushes with white spirit. Cured paint can be removed using xylene (paint stripper).

Limitations: Concrete must be a minimum of 6 months old before paint can be applied. Priming isn’t usually required, but if necessary apply a coat of 1 part white spirit to 4 parts paint and allow to dry. Bond It Floor Paint is touch dry within 2-3 hours depending on ambient temperatures. Please note that low temperatures can significantly affect drying time. This product is ready to use product and does not require diluting. Apply using brush or roller to give even coat. 2 coats are usually required, requiring 16-24 hours between each coat. Will dry to a satin finish.