Wall Tile Grout

Description

Name: Wall Tile Grout

A white, cement‐based, polymer modified, narrow joint filling compound for tile joints up to 3mm wide around all types of ceramic wall tiles. Conforms to BS EN 13888:2002 Type CG Class 1.

Features: For joints up to 3mm. – Ideal for all types of ceramic wall tiles. – Water and mould resistant. -Non-slumping – Suitable for swimming pools. – Interior and exterior application.

Application: Ideal for all types of ceramic tiled surfaces. This product is waterproof making it suitable for both internal and external applications, including kitchens, bathrooms and shower enclosures, swimming pools. In fully immersed locations, the inclusion of an acrylic latex additive in the grout mix can enhance water repellent properties. Quick and easy to apply, providing a smooth joint which is unaffected by water or weather. See Technical Data Sheet for mixing instructions.

Instructions: Mixing: Add the powder to water in a clean container and mixed to a smooth, creamy, lump-free consistency, preferably with a mechanical mixer. (Approximately 350ml of water to 1Kg of powder). Allow to stand for 5 minutes, re-mix briefly, and use within 1 hour. Part-used grout should never be “freshened up” by adding more water, discard any grout once it appears to lose workability (normally after 1 hour). Tiling applied to wood based surfaces, where slight movement is likely, should be grouted with WALL TILE GROUT mixed with an acrylic latex additive diluted 1:1 with water to improve flexural adhesion strength.
Application: Use a rubber squeegee to work the grout thoroughly and consistently into the tile joints, removing the excess as work proceeds across the tiled area. Fine grout residues can be washed away with a lightly dampened cloth or sponge up to 2 hours after
application, with a final clean finish being achieved using a dry cloth to polish the surface when the joints have dried and hardened by the next day. Protect from damp for 24 hours after application of the grout.
Open Time: Open time of the exposed adhesive bed is approx. 20 minutes, dependant on conditions.
Drying Time: Final set will occur between 12-24 hours.
Cleaning: Clean tools after use with soap and water before the product dries.

Limitations: